shenshenshenshen 发表于 2012-3-28 21:32
不如付付得正了。

shenshenshenshen 发表于 2012-3-28 17:25
你是不是要玩暴光不足成反片那种极端玩法呀？蛋疼呀

shenshenshenshen 发表于 2012-3-26 23:34
没暴光的彩色付片？后边肯定是基本白片没东东。俺片盒一面两张底片基本装不进去的。尤其是公元的。
黑白付付接触印俺用暴光盒子。印片的那种。

shenshenshenshen 发表于 2012-3-26 23:10
哈。偏棚酸钠。这个玩意不膨胀卤剂。药膜不软。您那脚指头印是印不上的。
TEA（三乙醇胺)不建议你们用.别再当蜂蜜喝了...
哪个简易用焦酚的路子是也就是让您们体会体会....
加乙二醇.5-8MM.海波1克.看情况加对氨基苯酚2克.或两克VC.

shenshenshenshen 发表于 2012-3-25 23:46
把底片弄的成黑白RAW。有意思嘛？直接拍数码RAW 不好呀？

shenshenshenshen 发表于 2012-3-25 23:43
越简易的越没价值呀。
上海俺实用的ISO=32。哈哈。脚指头不短了。肩膀还看不见。两头调子坐不实呀。可不要焦酚帮忙嘛。

shenshenshenshen 发表于 2012-3-25 23:36
告送您个绝的：罐笼药得用缄把PH 调到9-9。5之间才能赶上原装磕打粉的结果哈。这个还是当年俺师哥教俺的。

shenshenshenshen 发表于 2012-3-25 23:27
估计您也就是用罐笼药的主哈。
用您那上海黑白，真伤害俺们了。大平灰呀。谁说D76对它好用？
哪个铁胺盐找晒蓝图的去弄吧。。。。俺不爱看哪个蓝灰调。爱看暖调-浅棕黑。
上海还就是焦酚和VC药。或是大反差雷电路。这几种怪药----特点突出的玩意好整它。别的不灵。
米多的弄点阿肚叉的原装药，整整上海也可以。-----鸡架子配高级酱油哈。。。

shenshenshenshen 发表于 2012-3-25 23:09
你们上海阿拉丁啥酚都有嘛。套包上不卖这个试剂的。有毒哈。
用焦酚玩负片。也就HC110的没劲缄液兑上几克就齐活了。不用那么复杂。反正就用一次。
玩LITH应该没有焦酚的事呀。都是纯对本二酚的事，怕有的方子用银子水。成本就太高了。

shenshenshenshen 发表于 2012-3-25 00:11
好呀，这玩意换你的中药嘛。
不认得洋文。给翻译翻译吧。

pierre506 发表于 2012-3-21 09:39
B液：

pierre506 发表于 2012-3-21 09:28
翻了下，那LD20药方没找到~
上个利兹冲洗的两条黄金法则吧：
“Golden rules”
Lith printing of course is governed by the laws of physics and chemistry. All of the many variables in the process can affect the outcome and this is why it always had a reputation for unpredictability and unrepeatability. I have formulated two ‘Golden Rules’ which will allow you to work out from simple basic principles how to control and change your results in the way you want. Almost everything in Lith printing comes back to these two rules:

Golden Rule One
Image colour and contrast are related to grain size in the paper emulsion – which in turn is related to its stage of development. Small grains of early development are soft and warm. Large grains of late development are hard and cold. The progress of development is affected of course by dilution, temperature, time and freshness.

Golden Rule Two
Highlights are controlled by exposure. Shadows are controlled by development (‘snatch point’).

This is the process in a ...