新手新入的EM5求助

433 5

[1 楼] FelixBJX [泡菜] 13-6-23 22:39 本人是新手想咨询用过EM5的朋友们如何查EM5的快门数呢?
[6 楼] 菜鸟中的战斗机 [泡菜] 13-6-25 10:42 瓜田李下发表于 2013-6-24 00:22 By following these steps you can check your shutter count as well as a few other things. Follow these steps:1. While holding the "Menu" button, press Power button to switch on 按住Menu键的同时按电源键2. Press "Menu" and go to "Monitor brightness adjustment" screen 按Menu进入菜单，进入屏幕亮度调整3. Press "Info" and "OK" button at same time, you will see the screen showing "Olympus" 同时按住Info和OK键，这时你应该可以看到屏幕上显示Olympus...4. Press the following buttons in the sequence: Up, Down, Left, Right and then press the Shutter, followed by Up (dial button in my E-P2) 按顺序按下：上，下，左，右，快门，上，你就能进入工程菜单了5. Engineering mode page is seen. Press dial button to Page 1, 2, 3, and "D". 通过上下左右键进入Page1, 2, ,3, D6. Shutter count is on "Page 2" under "R". 其中， Page 2的R 显示的就是快门数。 EM5的电源是拨杆啊，哪里有电源键？
[5 楼] FelixBJX [泡菜] 13-6-24 16:26 瓜田李下发表于 2013-6-24 00:22 By following these steps you can check your shutter count as well as a few other things. Follow these steps: 1. While holding the "Menu" button, press Power button to switch on 按住Menu键的同时按电源键 2. Press "Menu" and go to "Monitor brightness adjustment" screen 按Menu进入菜单，进入屏幕亮度调整 3. Press "Info" and "OK" button at same time, you will see the screen showing "Olympus" 同时按住Info和OK键，这时你应该可以看到屏幕上显示Olympus... 4. Press the following buttons in the sequence: Up, Down, Left, Right and then press the Shutter, followed by Up (dial button in my E-P2) 按顺序按下：上，下，左，右，快门，上，你就能进入工程菜单了 5. Engineering mode page is seen. Press dial button to Page 1, 2, 3, and "D". 通过上下左右键进入Page1, 2, ,3, D 6. Shutter count is on "Page 2" under "R". 其中， Page 2的R 显示的就是快门数。谢谢终于知道了这个查询的方法让我想到了魂斗罗30人的方法啊! 哈哈
[4 楼] 瓜田李下 [陈年泡菜] 13-6-24 00:22 By following these steps you can check your shutter count as well as a few other things. Follow these steps: 1. While holding the "Menu" button, press Power button to switch on 按住Menu键的同时按电源键 2. Press "Menu" and go to "Monitor brightness adjustment" screen 按Menu进入菜单，进入屏幕亮度调整 3. Press "Info" and "OK" button at same time, you will see the screen showing "Olympus" 同时按住Info和OK键，这时你应该可以看到屏幕上显示Olympus... 4. Press the following buttons in the sequence: Up, Down, Left, Right and then press the Shutter, followed by Up (dial button in my E-P2) 按顺序按下：上，下，左，右，快门，上，你就能进入工程菜单了 5. Engineering mode page is seen. Press dial button to Page 1, 2, 3, and "D". 通过上下左右键进入Page1, 2, ,3, D 6. Shutter count is on "Page 2" under "R". 其中， Page 2的R 显示的就是快门数。 The other lines on the screen mean: R: shutter release count 快门数 S: flash use count 闪光数 C: CMOS cleaning mode (with mirror lock-up - in E-410 series) U: number of ultrasonic dedusting, ~ number of power switch on 自动除尘数（相当于电源开关次数） V: number of use of LiveView 使用Liveview的次数 B: number of shot using In-Body Stablization 使用防抖的次数 Please be careful when doing this. Although it's probably perfectly safe to do this i hold no responsibility if you mess up your Pen.
[3 楼] FelixBJX [泡菜] 13-6-24 00:00 没有朋友知道吗？本帖由移动终端发布
[2 楼] jovijiang [泡菜] 13-6-23 22:54 帮顶吧本帖由安卓客户端发布